JCM800 CHASSIS - WITH FACEPLATES
This Chassis comes with 4 Cage Nuts Installed
CHASSIS LAYOUT DRAWING HERE
This chassis is perfect for building JCM800 type circuits.
There are 4 holes for 8 pin sockets, allowing 100W amps to be built into the chassis! The first two holes can be opened up to 35mm for cap cans if required, i.e. for 50watt Amps
There are no transformer holes drilled so that you can use any transformer set you prefer. Using stand up style transformers will give maximum space to work with inside the chassis.
Valve socket holes are sized for the high quality Belton sockets.
The front panel holes are sizes for 8mm type potentiometers with location holes to prevent the potentiometer turning, this removes the requirement to break the location tab off the potentiometer to get them to fit.
The overall chassis sizes are the same as a JTM45 type chassis, however we have folded the mounting lips inwards which creates more space inside the chassis to work with. The nominal chassis sizes are:
- Length:468mm
- Width:165mm
- Height:65mm